| 产品名称 | D-白蔗糖 |
|---|---|
| 英文名称 | D-Leucrose |
| 英文别名 | 5-O-α-D-Glucopyranosyl-D-fructose |
| 规格或纯度 | ≥98% |
| 运输条件 | 常规运输 |
| CAS编号 | 71205-61-3 |
|---|---|
| 比旋光度 | α20/D -8.2°±1°, 24h, c = 4 in water |
| 折光率 | n20D1.66 (Predicted) |
| 沸点 | ~660.7° C at 760 mmHg (Predicted) |
| 溶解性 | Soluble in water. |
| 储存温度 | 室温 |
| 密度 | ~1.8 g/cm3(Predicted) |
| 分子量 | 342.3 |
| 分子式 | C₁₂H₂₂O₁₁ |
| 品牌 | Jinpan |
| Smiles | C([C@@H]1[C@H]([C@@H]([C@H]([C@H](O1)O[C@H](CO)[C@H]([C@@H](C(=O)CO)O)O)O)O)O)O |
| PubChem CID | 165577 |
| 产品名称 | FITC-DEAE-聚蔗糖 |
|---|---|
| 英文名称 | FITC-DEAE-polysucrose |
| 别名 | FITC-diethylaminoethyl-polysucrose;FITC-DEAE-polysucrose 70 |
| 英文别名 | FITC-diethylaminoethyl-polysucrose;FITC-DEAE-polysucrose 70 |
| 规格或纯度 | 70 kDa |
| 运输条件 | 常规运输 |
FITC-DEAE-Polysucrose is designed for special studies on membrane and transport properties in cells and tissues. FITC-DEAE-polysucroses are standard FITC-polysucroses carrying cationic (positively charged) diethylaminoethyl groups. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-DEAE-polysucrose with the molecular weight of either70 kDa or 400 kDa. FITC-DEAE-polysucrose is supplied as a yellow powder.Polysucrose are renamed from Ficoll™.
Structure
Polysucrose is a high molecular weight sucrose-polymers formed by copolymerisation of sucrose with epichlorohydrin. The molecules are highly branched, and the high content of hydroxyl groups leads to very good solubility in aqueous media. In FITC-DEAE-polysucrose, the content is approximately 5% which is equivalent to about one DEAE-group for every five glucose units. Fluorescein (FITC) groups are introduced by reaction with fluorescein isothiocyanate.
Spectral data
Excitation maximum is 493 nm and emission maximum is 523 nm in pH 9.
Application
FITC-DEAE-polysucrose is normally used for studying the permeability of polycationic polymers relative to neutral polymers in organs, tissues and cells. Polysucrose behaves as an ideal neutral sphere.
FITC-DEAE-Polysucrose is designed for special studies on membrane and transport properties in cells and tissues. FITC-DEAE-polysucroses are standard FITC-polysucroses carrying cationic (positively charged) diethylaminoethyl groups. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-DEAE-polysucrose with the molecular weight of either70 kDa or 400 kDa. FITC-DEAE-polysucrose is supplied as a yellow powder.Polysucrose are renamed from Ficoll™.
Structure
Polysucrose is a high molecular weight sucrose-polymers formed by copolymerisation of sucrose with epichlorohydrin. The molecules are highly branched, and the high content of hydroxyl groups leads to very good solubility in aqueous media. In FITC-DEAE-polysucrose, the content is approximately 5% which is equivalent to about one DEAE-group for every five glucose units. Fluorescein (FITC) groups are introduced by reaction with fluorescein isothiocyanate.
Spectral data
Excitation maximum is 493 nm and emission maximum is 523 nm in pH 9.
Application
FITC-DEAE-polysucrose is normally used for studying the permeability of polycationic polymers relative to neutral polymers in organs, tissues and cells. Polysucrose behaves as an ideal neutral sphere.
| 溶解性 | 易溶于水。 |
|---|---|
| 储存温度 | 室温,干燥 |
| 分子式 | |
| 品牌 | Jinpan |
| x_emission | 523 nm in pH 9 |
| x_excitation | 493 |
| 产品名称 | FITC-DEAE-聚蔗糖 |
|---|---|
| 英文名称 | FITC-DEAE-polysucrose |
| 别名 | FITC-diethylaminoethyl-polysucrose;FITC-DEAE-polysucrose 400 |
| 英文别名 | FITC-diethylaminoethyl-polysucrose;FITC-DEAE-polysucrose 400 |
| 规格或纯度 | 400 kDa |
| 运输条件 | 常规运输 |
FITC-DEAE-Polysucrose is designed for special studies on membrane and transport properties in cells and tissues. FITC-DEAE-polysucroses are standard FITC-polysucroses carrying cationic (positively charged) diethylaminoethyl groups. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-DEAE-polysucrose with the molecular weight of either70 kDa or 400 kDa. FITC-DEAE-polysucrose is supplied as a yellow powder.Polysucrose are renamed from Ficoll™.
Structure
Polysucrose is a high molecular weight sucrose-polymers formed by copolymerisation of sucrose with epichlorohydrin. The molecules are highly branched, and the high content of hydroxyl groups leads to very good solubility in aqueous media. In FITC-DEAE-polysucrose, the content is approximately 5% which is equivalent to about one DEAE-group for every five glucose units. Fluorescein (FITC) groups are introduced by reaction with fluorescein isothiocyanate.
Spectral data
Excitation maximum is 493 nm and emission maximum is 523 nm in pH 9.
Application
FITC-DEAE-polysucrose is normally used for studying the permeability of polycationic polymers relative to neutral polymers in organs, tissues and cells. Polysucrose behaves as an ideal neutral sphere.
FITC-DEAE-Polysucrose is designed for special studies on membrane and transport properties in cells and tissues. FITC-DEAE-polysucroses are standard FITC-polysucroses carrying cationic (positively charged) diethylaminoethyl groups. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-DEAE-polysucrose with the molecular weight of either70 kDa or 400 kDa. FITC-DEAE-polysucrose is supplied as a yellow powder.Polysucrose are renamed from Ficoll™.
Structure
Polysucrose is a high molecular weight sucrose-polymers formed by copolymerisation of sucrose with epichlorohydrin. The molecules are highly branched, and the high content of hydroxyl groups leads to very good solubility in aqueous media. In FITC-DEAE-polysucrose, the content is approximately 5% which is equivalent to about one DEAE-group for every five glucose units. Fluorescein (FITC) groups are introduced by reaction with fluorescein isothiocyanate.
Spectral data
Excitation maximum is 493 nm and emission maximum is 523 nm in pH 9.
Application
FITC-DEAE-polysucrose is normally used for studying the permeability of polycationic polymers relative to neutral polymers in organs, tissues and cells. Polysucrose behaves as an ideal neutral sphere.
| 溶解性 | 易溶于水。 |
|---|---|
| 储存温度 | 室温,干燥 |
| 分子式 | |
| 品牌 | Jinpan |
| x_emission | 523 nm in pH 9 |
| x_excitation | 493 |
| 产品名称 | FITC-聚蔗糖 |
|---|---|
| 英文名称 | FITC-polysucrose |
| 别名 | FITC-polysucrose 50;Fluorescein isothiocyanate-polysucrose |
| 英文别名 | FITC-polysucrose 50;Fluorescein isothiocyanate-polysucrose |
| 规格或纯度 | 50 kDa |
| 运输条件 | 常规运输 |
Polysucrose (renamed from Ficoll™) is a polymer which displays excellent biocompatibility. Polysucrose is more sensitive to acid than dextran so that care must be taken when working at acid pH. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-polysucrose from 20 kDa to 400 kDa. FITC-polysucroses are supplied as a yellow powder.
Structure
Polysucrose is a polymer synthesised by cross-linking sucrose with epichlorohydrin. FITC-Polysucrose is prepared by reacting polysucrose with FITC under similar conditions to those used for FITC-dextrans. Polysucrose has a more spherical structure and is less flexible compared to dextran
Spectral data
FITC-polysucrose has an excitation maximum of 493 and an emission maximum at 523 nm at pH 9.
Application
FITC-polysucrose is mainly used for studying permeability and microcirculation. Due to its spherical structure, it is often used for studies of glomerular filtration.
Polysucrose (renamed from Ficoll™) is a polymer which displays excellent biocompatibility. Polysucrose is more sensitive to acid than dextran so that care must be taken when working at acid pH. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-polysucrose from 20 kDa to 400 kDa. FITC-polysucroses are supplied as a yellow powder.
Structure
Polysucrose is a polymer synthesised by cross-linking sucrose with epichlorohydrin. FITC-Polysucrose is prepared by reacting polysucrose with FITC under similar conditions to those used for FITC-dextrans. Polysucrose has a more spherical structure and is less flexible compared to dextran
Spectral data
FITC-polysucrose has an excitation maximum of 493 and an emission maximum at 523 nm at pH 9.
Application
FITC-polysucrose is mainly used for studying permeability and microcirculation. Due to its spherical structure, it is often used for studies of glomerular filtration.
| 溶解性 | 易溶于水。 |
|---|---|
| 储存温度 | 室温,干燥 |
| 分子式 | |
| 品牌 | Jinpan |
| Excitation and Emision Ranges | 493nm and 523 nm at pH 9 |
| x_emission | 523 nm at pH 9 |
| x_excitation | 493 nm |
| 产品名称 | FITC-聚蔗糖 |
|---|---|
| 英文名称 | FITC-polysucrose |
| 别名 | FITC-polysucrose 40;Fluorescein isothiocyanate-polysucrose |
| 英文别名 | Polysucrose, (3’,6’-dihydroxy-3-oxospiro[isobenzofuran1(3H), 9’-[9H]xanthen]-5-yl)carbamothioate |
| 规格或纯度 | 40 kDa |
| 运输条件 | 常规运输 |
Polysucrose (renamed from Ficoll™) is a polymer which displays excellent biocompatibility. Polysucrose is more sensitive to acid than dextran so that care must be taken when working at acid pH. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-polysucrose from 20 kDa to 400 kDa. FITC-polysucroses are supplied as a yellow powder.
Structure
Polysucrose is a polymer synthesised by cross-linking sucrose with epichlorohydrin. FITC-Polysucrose is prepared by reacting polysucrose with FITC under similar conditions to those used for FITC-dextrans. Polysucrose has a more spherical structure and is less flexible compared to dextran
Spectral data
FITC-polysucrose has an excitation maximum of 493 and an emission maximum at 523 nm at pH 9.
Application
FITC-polysucrose is mainly used for studying permeability and microcirculation. Due to its spherical structure, it is often used for studies of glomerular filtration.
Polysucrose (renamed from Ficoll™) is a polymer which displays excellent biocompatibility. Polysucrose is more sensitive to acid than dextran so that care must be taken when working at acid pH. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-polysucrose from 20 kDa to 400 kDa. FITC-polysucroses are supplied as a yellow powder.
Structure
Polysucrose is a polymer synthesised by cross-linking sucrose with epichlorohydrin. FITC-Polysucrose is prepared by reacting polysucrose with FITC under similar conditions to those used for FITC-dextrans. Polysucrose has a more spherical structure and is less flexible compared to dextran
Spectral data
FITC-polysucrose has an excitation maximum of 493 and an emission maximum at 523 nm at pH 9.
Application
FITC-polysucrose is mainly used for studying permeability and microcirculation. Due to its spherical structure, it is often used for studies of glomerular filtration.
| 敏感性 | 对光敏感；对湿度敏感 |
|---|---|
| 溶解性 | 易溶于水。 |
| 储存温度 | 避光,室温,充氩,干燥 |
| 分子式 | |
| 品牌 | Jinpan |
| Excitation and Emision Ranges | 493nm and 523 nm at pH 9 |
| x_emission | 523 nm at pH 9 |
| x_excitation | 493 nm |
| 产品名称 | FITC-聚蔗糖 |
|---|---|
| 英文名称 | FITC-polysucrose |
| 别名 | FITC-polysucrose 20;Fluorescein isothiocyanate-polysucrose |
| 英文别名 | FITC-polysucrose 20;Fluorescein isothiocyanate-polysucrose |
| 规格或纯度 | 20 kDa |
| 运输条件 | 常规运输 |
Polysucrose (renamed from Ficoll™) is a polymer which displays excellent biocompatibility. Polysucrose is more sensitive to acid than dextran so that care must be taken when working at acid pH. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-polysucrose from 20 kDa to 400 kDa. FITC-polysucroses are supplied as a yellow powder.
Structure
Polysucrose is a polymer synthesised by cross-linking sucrose with epichlorohydrin. FITC-Polysucrose is prepared by reacting polysucrose with FITC under similar conditions to those used for FITC-dextrans. Polysucrose has a more spherical structure and is less flexible compared to dextran
Spectral data
FITC-polysucrose has an excitation maximum of 493 and an emission maximum at 523 nm at pH 9.
Application
FITC-polysucrose is mainly used for studying permeability and microcirculation. Due to its spherical structure, it is often used for studies of glomerular filtration.
Polysucrose (renamed from Ficoll™) is a polymer which displays excellent biocompatibility. Polysucrose is more sensitive to acid than dextran so that care must be taken when working at acid pH. All batches are checked for molecular weight, degree of substitution, loss on drying and free FITC. Aladdin produce FITC-polysucrose from 20 kDa to 400 kDa. FITC-polysucroses are supplied as a yellow powder.
Structure
Polysucrose is a polymer synthesised by cross-linking sucrose with epichlorohydrin. FITC-Polysucrose is prepared by reacting polysucrose with FITC under similar conditions to those used for FITC-dextrans. Polysucrose has a more spherical structure and is less flexible compared to dextran
Spectral data
FITC-polysucrose has an excitation maximum of 493 and an emission maximum at 523 nm at pH 9.
Application
FITC-polysucrose is mainly used for studying permeability and microcirculation. Due to its spherical structure, it is often used for studies of glomerular filtration.
| 溶解性 | 易溶于水。 |
|---|---|
| 储存温度 | 室温,干燥 |
| 分子式 | |
| 品牌 | Jinpan |
| Excitation and Emision Ranges | 493nm and 523 nm at pH 9 |
| x_emission | 523 nm at pH 9 |
| x_excitation | 493 nm |
| 产品名称 | 蔗糖6,1'-二羧酸 |
|---|---|
| 英文名称 | Sucrose 6,1′-Dicarboxylic Acid |
| 运输条件 | 常规运输 |
| CAS编号 | 155533-83-8 |
|---|---|
| 分子量 | 370.26 |
| 分子式 | C₁₂H₁₈O₁₃ |
| 品牌 | Jinpan |
| 产品名称 | 蔗糖6'-单磷酸二钾盐 |
|---|---|
| 英文名称 | Sucrose 6′-monophosphate dipotassium salt |
| 英文别名 | β-D-Fru-6-P-(2→1)-α-D-Glc |
| 规格或纯度 | ≥98% |
| 运输条件 | 超低温冰袋运输 |
| CAS编号 | 36064-19-4 |
|---|---|
| 储存温度 | -20°C储存 |
| 分子量 | 498.46 |
| 分子式 | C₁₂H₂₁O₁₄PK₂ |
| 品牌 | Jinpan |
| Smiles | C(C1C(C(C(C(O1)OC2(C(C(C(O2)COP(=O)(O)O)O)O)CO)O)O)O)O.[K] |
| PubChem CID | 16219958 |
| 产品名称 | 蔗糖 1′-羧酸 |
|---|---|
| 英文名称 | Sucrose 1′-Carboxylic Acid |
| 英文别名 | β-D-Arabino-2-Hexulofuranosidonic Acid, α-D-Glucopyranosyl |
| 运输条件 | 常规运输 |
| CAS编号 | 150787-99-8 |
|---|---|
| 分子量 | 356.28 |
| 分子式 | C₁₂H₂₀O₁₂ |
| 品牌 | Jinpan |
| 产品名称 | 乙酸蔗糖异丁酸酯溶液 |
|---|---|
| 英文名称 | Sucrose acetate isobutyrate solution |
| 别名 | 蔗糖乙酸异丁酸酯 溶液 |
| 英文别名 | Sucrose diacetate hexaisobutyrate |
| 规格或纯度 | 90 wt. % in denatured ethanol |
| 运输条件 | 常规运输 |
| CAS编号 | 126-13-6 |
|---|---|
| 沸点 | 105° C |
| 储存温度 | 室温 |
| 密度 | 1.1 g/mL at 25° C |
| 分子量 | 846.91 |
| 分子式 | C40H62O19 |
| 品牌 | Jinpan |
| Smiles | CC(C)C(=O)OC[C@@H]1[C@H]([C@@H]([C@H](O1)(COC(=O)C)O[C@@H]2[C@@H]([C@H]([C@@H]([C@H](O2)COC(=O)C) |
| PubChem CID | 2735139 |
